Midland CT990 instruction guide
| 13
VOX Delay - Menu Utilities 15
There’s a brief delay between when you finish talking and the radio returns to tx
mode; this delay can be adjusted.
In standby mode press
Menu Uti 15
; “
VOX DELAY
” will appear on the
display.
Press
Menu
to enter the function. The display will show different options: se-
lect the desired delay time with the
▼
/
▲
buttons or rotate the encoder.
Push
Menu
for confirmation and return to standby mode by pushing
Back
.
TOT function (Time Out Timer) - Menu Utilities 16
The TOT function is used to prevent a too long transmission. This function
temporarily blocks transmissions if the radio has been used beyond the maxi-
mum time permitted. Once reached the preset timer, the radio will be forced
in reception mode. When a transmission exceeds the pre-set time, you will
hear a warning sound to remind you that the transmission time is almost fi-
nished.
The transmission time can be set in 60 levels with 15 seconds each (between
15 and 600 seconds).
In standby mode, press
Menu Uti 16
; the screen will display “
TOT
”.
Push
Menu
to enter the function. Press the
▲
/
▼
buttons or rotate the enco-
der to select the desired TOT level, then press
Menu
to confirm.
To return to the standby mode press
Back
.
Roger Beep, end transmission tone (ROGER BEEP) - Menu
Utilities 17
Roger Beep can be enabled/disabled:
OFF:
Roger Beep disabled
ON:
Roger Beep tone at the end of transmission
In Standby mode press
Menu Uti 17
; the display will show “
ROGER
BEEP
”.
Press
Menu
to enter the function.
Select
ON/OFF
with the
▼
/
▲
controls or rotate the encoder. Push
Menu
to
confirm your selection and then
Back
to return in standby condition.
