18
SHIFT,
5
Transfer Mode (Call Forwarding)
Toggles the Transfer Mode ON or OFF. Upon receipt and decoding of a valid number, this feature allows
the radio to retransmit (forward) a number on the same or different channel.
SHIFT,
6
Kill Password
Permits entry of a password to use the Kill function. This function allows you to disable (kill) another radio
by sending that radio its proper kill code. Details of this feature may not be made available to every user.
SHIFT,
7
Information Display
If enabled during programming, sequentially displays programmed data such as channel frequencies,
CTCSS / DCS codes, select call and ANI numbers. Press SHIFT and hold 7 while the radio displays the
information.
SHIFT, 8
Keypad Lock
Turns the KEY LOCK feature on or off. When locked, certain keypad and control functions are locked
out. This may be used to prevent accidentally sending tones or switching channels. Variations of
operation may be selected during programming.
SHIFT, 9
Scan Mode Select
If the radio is in one of the scan modes,
SHIFT 9
will select the PRIORITY scan mode.
PRIO
will appear
in the upper left of the display and the radio will monitor the HIGH and LOW priority channels selected
during programming (see “Using Scan”).
SHIFT, *
Digital Encryption
If the radio is fitted with an optional Digital Encryption module, SHIFT * switches the module form the
clear to the encrypt mode.
*
(no SHIFT) PIN entry
If the radio has been programmed to require a Personal Identification Number (PIN) for operation, the
operator must press * to clear the display before entering the PIN. This will be requested upon turning on
the radio. The display will show
PLS PIN
. The operator must press * then enter the correct PIN
number.
SHIFT, 0
DTMF / 5Tone format select
If enabled during programming, when SHIFT is pressed and
0
is held for two seconds, the tone format
toggles from DTMF to 5Tone or from 5 Tone to DTMF.
SHIFT, #
All Scan Select
Turns on the All Scan mode. This mode scans all channels in the radio. The display will show
BY--AL--
SC
(Busy All Scan) indicating that the radio is scanning all channels (see “Using Scan”).
#
(no SHIFT) Program Scan Select
Turns on the Program Scan mode. The display will show
BY--PG—SC
(Busy Program Scan)
indicating
that the radio is scanning all channels that were selected for scan during programming (see “Using
Scan”).
SHIFT,
B
All Scan Priority Channel Select
Instantly selects one of the All Scan Priority Channels specified during programming. Repeated pressing
toggles between HIGH and LOW priority.
B
(no SHIFT) Program Scan Priority Channel Select
Instantly selects one of the Program Scan Priority Channels specified during programming. Repeated
pressing toggles between HIGH and LOW priority.
