Midian VS-1000, Manual

Page: 2 / 20

HARDWARE SPECIFICATIONS
Operating Voltage
4.75-15.5 VDC***
Operating Current – VS-1200:
Power Save Mode (COR Operation) 2.5 mA typical
Power Save Mode (VOX Operation) 10 mA typical
Clear or Inversion Operation 29 mA typical
FFT Scrambling Operation 83 mA typical
Average w/COR Power Save (80-10-10 cycle) <17 mA*
Average w/COR Power Save (90-5-5 cycle) ~10.5 mA*
Operating Current – VS-1000 & VS-1050:
Power Save Mode (COR Operation) 2.5 mA typical
Power Save Mode (VOX Operation) 10 mA typical
Clear or Inversion Operation 17.5 mA typical
Average w/COR Power Save (80-10-10 cycle) <5 mA*
Average w/COR Power Save (90-5-5 cycle) <4 mA*
Operating Temperature -30 - +60 C
Frequency Response 300-3000 Hz**
Input Impedance >45 k
Ω
Input Level (TX) 0.05-2.5 VPP
Input Level (RX) 0.05-2.5 VPP
Audio Output Impedance < 1200 Ohm
Dimensions ~1.6” L x 0.83” W x 0.21” H
* - The transmit and receive cycles are based on scrambled mode. When using clear mode, the consumption will decrease.
** - This is based on FFT scrambling. When using voice inversion this will vary.
*** - The VS-1000 and VS-1050 support 4.75 to 15.5 VDC. The VS-1200 supports 4.75 to 10 VDC. If a higher voltage input is
needed on the VS-1200 a 4.7 Volt Zener diode must be installed in series with the voltage input lead.
SECURITY SPECIFICATIONS
VS-1200:
Total Code Combinations ~6.2 x 10^23
Actual Code Combinations ~4 Billion
Number of Selectable Keys 3
Levels of Security 4
Inversion 2100-4100 Hz (0-15 Hz resolution)
Level 1 16 bins
Level 2 32 bins
Level 3 64 bins
VS-1000 & VS-1050:
Number of Selectable Keys 4
Inversion Frequency Range 2100-4100 Hz (0-15 Hz resolution)
VS-1200 & VS-1050 ANI SPECIFICATIONS
DTMF ANI Length
Up to 6-digits
DTMF ANI Timing 60/40 msec (Programmable)
5-Tone ANI Length Up to 6-digits
5-Tone ANI Timing Programmable
G-Star ANI Range 0001-9999
G-Star ANI Timing 320 msec
Motorola’s MDC-1200 ANI Range 0000-FFFF
Motorola’s MDC-1200 ANI Timing ~180 msec
Kenwood’s FleetSync Unit ID Range 1000-4999
Kenwood’s FleetSyncUnit ID Timing ~100-150 msec
2