Midian VS-1000, Manual

Page: 10 / 20

OPERATION
Mode Select:
Momentary Switch: When using a momentary switch, pressing and then releasing the switch will cause the
scrambler to switch modes. A medium tone followed by a high tone indicates the scrambler has been switched
into scrambled mode. A medium tone followed by a low tone indicates the scrambler has been switched into clear
mode.
Latched Switch: When using a latched switch, pressing the switch will toggle the mode. Depending on the
programmed polarity will determine the mode. For example if the polarity is programmed as low, then the
scrambler will be in scrambled mode when taken to ground.
Code Select:
Momentary Switch: When using a momentary switch, pressing and holding the switch will toggle the scrambler
through the programmed codes (1-3 codes) if programmed. The scrambler will emit a number of tones
corresponding to the code that is being switched to. When the desired code is reached simply release the switch.
Latched Switch: Multi-code operation is not available when using a latched switch.
1-Line Binary: If using the binary mode and up to 2 codes are programmed this provides selection of 2 codes
depending on the state of the code select line.
2-Line Binary: If using the binary mode and up to 4 codes are programmed this provides selection of up to 4
codes depending on the state of the code select lines. Note: The VS-1200 only supports up to 3 codes.
3-Line Binary: If using the binary mode and up to 8 codes are programmed this provides selection of up to 8
codes depending on the state of the code select lines. Note: Only the VS-1000 and the VS-1050 support 3-line
binary.
4-Line Binary: If using the binary mode and up to 16 codes are programmed this provides selection of up to 16
codes depending on the state of the code select lines. Note: Only the VS-1000 and the VS-1050 support 4-line
binary.
ANI Operation:
Transmitting ANI: When the PTT Input is pressed and/or released the VS-1200 or VS-1050 will key the radio
and transmit the programmed ANI.
Transmitting Emergency ANI: When the Emergency Input is taken high or low (depending on programming) the
VS-1200 or VS-1050 will key the radio and transmit the programmed ENI for the programmed number of times.
10