M
IDIAN
E
LECTRONICS
I
NCORPORATED
P
AGE
9
DDU-100/200
Manual
5.4.3 EDIT USER menu
Allows you to change information about a user. Select
the user you wish to edit in the same manner is if
placing a CALL to that user. Use the scroll buttons to
find the user you wish to edit. Press <SEND> to edit
the information for the selected user.
You will be prompted to fill out each field in turn. After
entering the data for a field, press <SEND> to go on to
the next field. To leave a field unchanged, simply press
<SEND> without entering data.
5.4.3.1 User ID field
This numeric field contains the primary ANI number
assigned to the user’s radio. This will be the number
used when calling a unit. ID’s may be 1 to 8 digits
depending on the ANI format used.
Range:
0-8 digits
Default:
blank
5.4.3.2 User
Name
field
This alphanumeric field contains the name of the user
associated with the user ID. A maximum of 14
characters may be used. See the
Entering
Alphanumeric Data
section for more information.
Range:
0-14 characters
Default:
blank
5.4.3.3 Spy ID setting
Specify the code required to spy on this unit. Leave
blank if not using this feature.
Range:
0-8 digits
Default:
blank
5.4.3.4 Kill ID setting
Specify the code required to disable this unit. Leave
blank if not using this feature.
Range:
0-8 digits
Default:
blank
5.5 SETUP
MENU
5.5.1 SOUNDS
SETUP
menu
5.5.1.1 Keypad Beep option
Turning this option on causes a beep to be heard for
each key press.
OFF
Keypad beeps off.
ON
Keypad beeps on.
5.5.1.2 Beep On ANI option
Turning this option on will cause an alert beep to be
heard every time a new ANI is received.
OFF
Do not beep when ANI comes in.
ON
Beep when ANI comes in.
5.5.1.3 Emerg Siren option
This causes a siren sound to be heard when an
emergency ANI is received. This requires turning on
the
Emerg Status
option in the
STATUS SETUP
menu.
OFF
Do not sound siren on emergency ANI.
ON
Sound siren on emergency ANI.
5.5.1.4 Internal Speaker setting
Normally, the internal speaker is on. This is required in
order for key beeps, error beeps, confirmation beeps,
and other system sounds to be heard. This also allows
audio received from the radio to be heard at the
console. If it is desired that absolutely no sound be
heard from the console speaker, this setting allows it to
be switched off.
OFF
Internal speaker disabled.
ON
Internal speaker enabled.
5.5.1.5 Auto Mute Speaker feature
This feature is designed to mute the internal speaker
while an ANI is being received. It works in conjunction
with the
Auto Mute Time
in the
RADIO SETUP
menu.
When this feature is enabled, the internal speaker
remains muted so long as there is no COR indication
coming from the radio. When the COR indication goes
active, the internal speaker will automatically unmute
after the Auto Mute Time expires.
Note:
System
sounds can still be heard during the mute period.
OFF
Do not mute the internal speaker.
ON
Mute/unmute
speaker
automatically.
5.5.2 TIME SETUP menu
In order for the correct time to be displayed, the time
clock must be set. The unit
must remain switched-on
at all times in order to keep track of the time. The clock
must be set each time the unit is powered up.
5.5.2.1 Hour
setting
Set the hour of the day in 24-hour format. Enter two
digits.
Range:
00-23
Default:
00
5.5.2.2 Minute
setting
Set the minutes past the hour. Enter two digits.
Range:
00-59
Default:
00
5.5.3 CONSOLE SETUP menu
5.5.3.1 Call Entry Mode setting
Determines if numeric entry or alphanumeric data entry
is the default mode when placing a call. The mode of
entry can be toggled by pressing the <*> key during
