Midian DDU-100 Instruction Manual Download

Page: 13 / 22

IDIAN

LECTRONICS

NCORPORATED

AGE

DDU-100/200

Manual

5.5.8.4 Status 1 Msg setting

See

Status 0 Msg setting

above.

Range:

0-10 characters

Default:

blank

5.5.8.5 Status 2 Msg setting

See

Status 0 Msg setting

above.

Range:

0-10 characters

Default:

blank

5.5.8.6 Status 3 Msg setting

See

Status 0 Msg setting

above.

Range:

0-10 characters

Default:

blank

5.5.8.7 Status 4 Msg setting

See

Status 0 Msg setting

above.

Range:

0-10 characters

Default:

blank

5.5.8.8 Status 5 Msg setting

See

Status 0 Msg setting

above.

Range:

0-10 characters

Default:

blank

5.5.8.9 Status 6 Msg setting

See

Status 0 Msg setting

above.

Range:

0-10 characters

Default:

blank

5.5.8.10 Status 7 Msg setting

See

Status 0 Msg setting

above.

Range:

0-10 characters

Default:

blank

5.5.8.11 Status 8 Msg setting

See

Status 0 Msg setting

above.

Range:

0-10 characters

Default:

blank

5.5.8.12 Status 9 Msg setting

See

Status 0 Msg setting

above. Note that this status

message is associated with emergency status.

Range:

0-10 characters

Default:

blank

5.5.9 UTILITIES

menu

5.5.9.1 Reset

Defaults

This will reset all the parameters listed above to the
factory default settings. The contents of the user

database will not be affected.

5.5.9.2 Clear

Database

This will clear the user database of all ID's and User
Names. The contents of the other parameters listed
above will not be affected.

5.5.9.3 Factory

Debug

This is used by the factory for product testing.

Do not

select this function unless directed to do so by
Midian Technical Support.

Damage to the unit may

result.

Summary of Contents for DDU-100























Search results

Summary of Contents for DDU-100

Reviews:

Related manuals for DDU-100

Brands by name

Popular brands

Midian DDU-100, Instruction Manual

Search results

Summary of Contents for DDU-100

Reviews:

Related manuals for DDU-100

Brands by name

Popular brands