®
NOTICE - INSTRUCTIONS - INSTRUCCIONES - ISTRUZIONE MANUALE - HANDBUCH
EMC
960°
Ce produit est garanti contre tout défaut de fabrication pendant une durée de 2 ans / This product is guaranteed against any manufacturing defect during a duration of 2 years
Este producto es garantizado contra todo defecto de fabricación durante una duración de 2 años / Questo prodotto è garantito contro ogni difetto di fabbricazione durante una durata di 2 anni
Dieses Produkt ist gegen jeden Fabrikationsfehler während einer Dauer von 2 Jahren garantiert
Vision-EL
®
Vision-EL
®
Vision-EL
®
Vision-EL
®
(Link/Unlink)
47mm
19mm
24mm
53mm
197,5mm
78mm
Antenna
Brightness Dimming
Mode
Product Features
This product is a 433MHz frequency wireless remote control. It can control specified
433MHz series smart lights with color changing, color temperature, saturation and
brightness adjustable.
Technical Parameters
Voltage: 3V(AAA x 2PCS)
Transmitting Power: 10dBm
Standby Power Consumption: 16uA
RF: 433MHz
Control Distance: 50m
(Lamps 0.5m underwater)
Size: 197,5mm x 47mm x 19mm
Products Key Diagram
Touch the color ring to change colors.
Under white light mode, adjust color temperature.
Under color light mode, change color saturation.
Slide the brightness sliver to adjust the brightness.
Press the button to get white light.
Touch ON button, turn on the linked device.
Touch OFF button, turn off the linked device.
Dynamic mode switching button.
Short press: Lower the dynamic mode speed.
Long press under static mode, lamp will blink one time into 60s Delay OFF mode.
Short press: Accelerate the dynamic mode speed.
Long press under static mode, lamp will blink one time into 10min Delay OFF mode.
Color Ring
Master OFF
Speed+ /
10min Delay OFF
“O” Zone OFF
Indicator light
Saturation / CCT Control
Master ON
White light
Speed- /
60s Delay OFF
“ ” Zone ON
Grouping of several lights
You can add an endless numbers of lights to a zone on the 8 channels remote by
linking the lights to different zones. This way you are completely flexible in creating
different group combinations. Below you can see some grouping examples.
Light 1
Light 3
Light 5
Light 2
Light 4
Light 1
Light 3
Light 5
Light 2
Light 4
Light 1
Light 3
Light 5
Light 2
Light 4
Remark:
1. The user can re-programme freely as needed. One remote can control countless
lamps or controllers, but one lamp or controller can only be controlled by four
remotes (Max).
2. Please check the battery installation and controller (totally discharge the power),
when you programme after switching and switching on.
Linking&Unlinking
Remark:
The light can be working after linking with the remote controller.
Linking Instructions
Unlinking Instructions
The light blink 3 times slowly
means the linking is done
successfully
The light blinking 10 times
quickly, means the unlinking
successfully
When the light on, short press
any zone of “ ”
3 times
within
3 seconds
When the light on, short press
“ ”
5 times
within 3 seconds
Switch off the light,
after 10 seconds
switch on again
Switch off the light,
after 10 seconds
switch on again
Power
Power
Link/Unlink
button
If the light not blink slowly, the linking failed, pis switch off the light
again, and follow the above steps again.
If the light not blink quickly, the unlink failed, pis switch off the light
again, and follow the above steps to unlink again.
Attention
1. In the using of the remote, if the indicated lamp blinking quickly, pls change the
battery in time. Pls don't use poor quality battery to avoid the leaking of battery
liquid to damage the remote controller.
2. This 433MHz remote control system is precise electronic product, don't use it in
humid, high temperature, dust and high voltage environment. Saving it at indoor, dry
and no static electricity environment.
3. Pls don't use the remote controller on the wide-range metal or strong electromagne-
tic wave area, otherwise, it will badly affect the controlling distance.
Power
Power
Link/Unlink
button
