
- 14 -
Cleaning Beverage Cooler
You should do the following operation:
1. Pull out power plug or disconnect the protecting device!
2. Scrub the sealing parts of the door only with clean water and soon wipe the
water off thoroughly.
3. Please clean the Beverage Cooler with slightly warm water and a little
detergent agent. Do not splash water to the operation control element or the
lighting system on the glass door.
4. Reconnect the Beverage Cooler with power source and then connect it with
power source after it has been cleaned.
Hints
Do not use detergent agent or solvent containing sands or acid.
Please regularly clean the scupper, so the dew can be discharged. You can
use small stick or similar objects to clean the scupper.
Energy Saving
Please place the Beverage Cooler in dry and ventilated room! The
Beverage Cooler should not be placed on the location where can be
directly irradiated by sunshine or where is close to heating sources, such
as: heating radiator or cooking stove, etc. If necessary, you can use
heating insulation board.
Try to shorten the opening time of door of Beverage Cooler!
First let beverage cool down and then place the beverage into Beverage
Cooler!
·
Try not to open the door too often, especially when the weather is wet or hot.
Once you open the door, mind to close it as soon as possible.