![background image](http://html1.mh-extra.com/html/midea/rsj-420-pzn1-h/rsj-420-pzn1-h_technical-manual_1791198070.webp)
MCAC-HTSM-201506 Midea R410A Direct Heating Commercial Heat Pump 50Hz Technical Manual
70
key when finished, and then the minute of the clock will flash, it means the current
setting is the minute of the clock, press the
▲ or ▼ key to adjust, press
OK
key when
finished or wait for 7 seconds to confirm. During the setting process press the
CANCEL
key to exit without saving.
Setting the clock should be correct, otherwise cannot get the correct timing on and
timing off.
Set water level (Reserved)
Press the SET key 5 times to enter the water level setting. Press the
▲ or ▼ key to
adjust the water level. Press OK key when finished or wait for 7 seconds to confirm.
During the setting process, press the CANCEL key to exit without saving. The setting
value is 50%, 75% or 100%. Press the
or
key to check the water level which has
been set under main page.
1.3.3 Auxiliary operation
Cycle heating (Reserved
)
Cycle heating function makes the direct heating water heater to run the cycle heating
function.