![background image](http://html1.mh-extra.com/html/midea/rsj-420-pzn1-h/rsj-420-pzn1-h_technical-manual_1791198069.webp)
Midea R410A Direct Heating Commercial Heat Pump 50Hz Technical Manual MCAC-HTSM-201506
69
Check timing information: to check the timing which has been set, press
or
key under main page, the on and off time of Timer 1, Timer 2 and Timer 3 will be
displayed in turns.
Cancel timing: press and hold
CANCEL
key for 3 seconds, then all the effective
timing periods will be cancelled.
To avoid timing error, each period of timing should not be crossed, e.g.:
Set the cycle heating water temperature (Reserved)
Continuous press
SET
key 3 times to enter cycle heating water temperature
setting. The LCD will display
‘
SET CYCLE WATER TEMP.
’ and temperature value
will flash.
Press the
▲ or ▼ key to adjust the temperature value, press
OK
key or wait for 7
seconds to confirm. During setting process pressing
CANCEL
key to exit without
saving.
Check cycle water temperature value setting: press
or
key under main
page to check the value.
Set clock
Press the
SET
key 4 times to enter clock setting. The hour of the clock will flash, which
means the current setting is the hour of the clock, press the
▲ or ▼ key to adjust, press