3
4
1
1
2
2
4
4
5
5
3
3
9
9
10
10
8
8
6
6
7
7
1
2
3
4
ON/OFF Button( )
This button turns the air conditioner ON
and OFF.
Used to select the fan speed in four steps:
HIGH MED LOW AUTO
Used to select the fan speed in four steps:
AUTO LOW MED HIGH
FAN Button( )
FAN Button( )
You can not switch the fan speed in AUTO
or DRY mode.
Press the Fan button( ) , MODE button,
ON/OFF or ECO button will cancel the Silent
function.
Operation of buttons
SET Button
UP Button( )
Push this button to decrease the set
temperature or Timer setting hours.
DOWN Button( )
5
6
Press this button to increase the set
temperature or Timer setting hours.
Operation of buttons
NOTE
：
NOTE
：
NOTE
：
AUTO
AUTO
ECO SET TEMP.
ECO SET TEMP.
ON
ON
OFF
OFF
AUTO
AUTO
COOL
COOL
DRY
DRY
HEAT
HEAT
FAN
FAN
SET
SET
MODE
MODE
When the air conditioner operates under
heating mode with the set temperature of
O
17 C, pressing button continously for
two times will activate 8 Degree heating.
The indoor unit display shows FP .
,,
, ,
Hold down this button for at least 2 seconds
to activate/cancel
Silent
mode.
Due to low
frequency operation of compressor, it may
result in insufficient cooling and heating
capacity.
Hold down this button for at least 2 seconds
to activate/cancel
Turbo
mode.
Turbo function
enables the unit to reach the preset temperature
at cooling or heating operation in the shortest
time (if the indoor unit does not support this
function, there is no corresponding operation
happened when pressing this button.)
Used to stop or start horizontal louver move-
ment .
Hold down this button for 2 seconds
to start/stop vertical louver movement.
Swing Button( )
(applicable to RG58A2/RG58B2/RG58A4)
Swing Button( )(applicable to RG57B1)
Used to initiate the following functions in the
sequence below, in conjuction with the
& buttons.
Timer off
Self clean
Follow me
Sleep
Fresh
Timer on
( Indicate optional functions)
Press the SET button to select the desired
function, the selected symbol will flash on
the display area, then press the or
button to confirm.
SLEEP function( )
FRESH function( )
(optional)
SELF CLEAN function( )
(optional)
It can maintain the most comfortable temper-
ature and save energy. This function is
available on COOL, HEAT or AUTO mode only .
When the FRESH function is initiated, the
Ionizer/Plasma Dust Collector(depending on
models) is energized and will help to
remove pollen and impurities from the air.
For the detail, see sleep operation in
USER S MANUAL.
,
, ,
, ,
,,
,,
Under SELF CLEAN mode, the air
conditioner will automatically clean and
dry the Evaporator and keep it as fresh
for the next operation.
SHORT
CUT
SHORT
CUT
Used to stop or start horizontal louver move-
ment or set the desired up/down air flow
direction. The louver can be move at a range
o
of about 6 each time you press the button.
If keep pushing more than 2 seconds, the
louver will swing up and down automatically.
