Timer operation
Press the SET button can set the auto-on/off
time of the unit.
1. Press the SET button, the Timer on indicator " "
displays and flashes, the last Auto-on setting time
and the signal "h" will be shown on the LCD display
area. Now it is ready to reset the Auto-on time to
START the operation.
2. Press the or button to set desired Auto-on
time. Each time you press the button, the time
increases/decreases by half an hour between 0
and 10 hours and by one hour between 10 and
24 hours.
3. Once the desired time establishes ,there will be
three seconds delay before the remote controller
transmits the signal to the air conditioner. Then,
the signal "h" will disappear , the Timer on indicator
will remain on and the set temperature will
re-appear on the LCD display window.
1. Press the SET button until the Timer on indicator
" " displays and flashes, the last Auto-off
setting time and the signal "h" will be shown on the
LCD display area. Now it is ready to reset the
Auto-off time to STOP the operation.
2. Press the or button to set desired Auto-off
time. Each time you press the button, the time
increases/decreases by half an hour between 0
and 10 hours and by one hour between 10 and
24 hours.
3. Once the desired time establishes ,there will be
three seconds delay before the remote controller
transmits the signal to the air conditioner. Then,
the signal "h" will disappear, Timer off indicator
will remain on and the set temperature will
re-appear on the LCD display window.
To set the Auto-on time.
To set the Auto-off time.
When you select the timer operation, the remote controller automatically transmits the
timer signal to the indoor unit for the specified time. Therefore, keep the remote
controller in a location where it can transmit the signal to the indoor unit properly.
The effective operation time set by the remote controller for the timer function
is limited to the following settings: 0.5, 1.0, 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 4.5, 5.0,
5.5, 6.0, 6.5, 7.0, 7.5, 8.0, 8.5, 9.0, 9.5, 10, 11, 12, 13, 14, 15,16,17, 18, 19, 20,
21, 22, 23 and 24.
CAUTION
!
Example of timer setting
Start
Off
6 hours later
(Auto-on Operation)
The TIMER ON feature is useful when you want
the unit to turn on automatically before you return
home. The air conditioner will automatically start
operating at the set time.
To start the air conditioner in 6 hours.
1. Press the SET button to select TIMER ON, the
last setting of starting operation time and the
signal "h" will show on the display area.
2. Press the or button to display
"6.0h " on the TIMER ON display of the remote
controller.
3. Wait for three seconds and the digital display
area will show the temperature again. The
" " indicator remains on and this
function is activated.
TIMER ON
Example:
Set
9
10
ON
OFF
ON
OFF
2
1
SET
MODE
COOL
SET TEMP.
ON
ON
SHORT
CUT
