![background image](http://html1.mh-extra.com/html/midea/rg58b2-bge/rg58b2-bge_user-manual_1791603004.webp)
8
10
LOCK Function
Press button ECO and simultaneously
to lock or unlock the keyboard.
Operation of buttons
Indicators on LCD
Fan speed indication
Mode display
Information are displayed when
the remote controller is powered
up.
Displayed when data transmitted.
Displayed when remote controller is ON.
Indicated LOCK feature is activated
Battery display(low battery detection)
Displayed in ECO mode operation
Low speed
Medium speed
High speed
Auto fan speed
Note:
of clear presentation. But during the actual operation
only the relative functional signs are shown on the
display window.
All indicators shown in the figure are for the purpose
Displayed when TIMER ON time is set.
Displayed in Sleep Mode operation.
Displayed in Self clean operation.
Displayed when Silent feature is activated
Indicated that the air conditioner is
operating in Follow me mode
Displayed in Fresh operation.
Displayed when TIMER OFF time is set.
Show set temperature or room
temperature, or time under TIMER
setting.
5
6
1
2
4
5
3
9
10
8
6
7
AUTO
ECO SET TEMP.
ON
OFF
AUTO
COOL DRY HEAT FAN
SET
MODE
Press this button to modify the air conditioner
mode in a sequence of following:
MODE Button
AUTO
COOL
DRY
HEAT
FAN
NOTE
:
Please do not select HEAT mode if the
machine you purchased is cooling only type.
Heat mode is not supported by the cooling only
appliance.
9
DO NOT DISTURB Button( )
Press this button to turn off the indoor screen
display, and also turn off the Air conditioner
buzzer, the fan speed shifts to low, which
create a comfortable and quiet environment.
Press it again to cancel this function.
Under DO NOT DISTURB mode, the display
will illuminate for 10 seconds while adjusting
the mode, set temperature or fan speed, etc.
7
AUTO
AUTO
ECO SET TEMP.
ON
ON
OFF
OFF
COOL
COOL
AUTO
AUTO
DRY
DRY
HEAT
HEAT
FAN
FAN
SHORT
CUT
SHORTCUT Button
Used to restore the current settings or
resume previous settings.
On the first time connecting to the power,
if push the SHORTCUT button, the unit
O
will operate on AUTO mode, 26 C, and fan
speed is Auto.
Push this button when remote controller is
on, the system will automatically revert
back to the previous settings including
operating mode, setting temperature, fan
speed level and sleep feature(if activated).
If pushing more than 2 seconds, the system
will automatically restore the current
operation settings including operating mode,
setting temperature, fan speed level and
sleep feature(if activated ).
FOLLOW ME function( )
(optional)
When the Follow Me function is activated,
the remote display is actual temperature
at its location. The remote control will send
this signal to the air conditioner every 3
minutes interval until press the FOLLOW
ME button again.