Midea PH Series, Manual

Page: 18 / 34

16

8 Installation details

8.1 Installation instructions
Your installation location should meet the following requirements:
-Make sure that you install your unit on an even surface to minimize noise and vibration.
-The unit must be installed near a grounded plug, and the Collection Tray Drain (found on the back of
the unit) must be accessible.
-The unit should be located at least 30cm (12”) from the nearest wall to ensure proper air conditioning.
The horizontal louver blade should be at least 50cm (19.7”) away from obstacles.
-DO NOT cover the Intakes, Outlets or Remote Signal Receptor of the unit, as this could cause
damage to the unit.
Step1:Preparing the Exhaust Hose assembly
Press the exhaust hose (or extended exhaust hose) into the window slider adaptor(or wall exhaust
adaptor) and unit adaptor, clamp automatically by elastic buckles of the adaptors.
Type window installation:
Location
Window slider kit Installation