becoming too warm.
4. Adjust the thermostat to maximum and select the desired power
setting. Once the room is comfortable, rotate the thermostat
counterclockwise, until the heater shuts off. The thermostat will
now maintain the temperature by cycling the heater on or off.
During particularly cold weather, the low power setting may be
insufficient to satisfy the thermostat. Select a higher setting for
these periods.
5. Use the oscillation function with the switch on.
REMEMBER: Portable electric heaters are designed for spot heating,
or as a supplementary heat source. They are not intended to be
main sources of heat during the normal heating season.
CAUTION: TO PREVENT ELECTRIC SHOCK. MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
NOTE: There may be trace of smoke or odor when unit is first
operated. Do not be alarmed, this indicates that a drop of oil fell on
the heating coil during the manufacturing process. It will quickly
evaporate, and should not re-occur.
PILOT LIGHT
The heater fan is equipped with a pilot light that glows whenever
the heater is plugged in and turned on. It will shut off if the
thermostat has cycled the fan and heating elements off. This
feature is to prevent you from being unaware that the heater is
operating and maintaining the temperature of the room. When you
do not wish the heater to control the room temperature, turn the
control switch to (OFF) and remove the plug from the electrical
outlet.
HOW TO CLEAN YOUR CERAMIC HEATER
A) Before any cleaning, make sure that
1. The Power Switch is set to OFF position.
2. Disconnect power supply at source by removing plug from power
outlet.
B) Regular Cleaning
1. To clean the enclosure, use a clean, soft and lightly wet cloth to
gently wipe off the dirt from the surface of unit. Be sure not to
wet the Ceramic Heating Element and the switches. Allow the
unit to dry completely before using it.
2. Do not use cleaning liquid or other chemicals to spray on the
unit.
3. After using the unit for a period of time, dust and other particles
in the air will collect on the air filter at the rear of the unit. Take
out the filter cover, remove the filter and rinse out in warm
water, allowed to dry completely. and reinstalled.
Air filter should be cleaned regularly.
4. Always tighten rear grill. Best is to use vacuum cleaner.
HOW TO STORE YOUR CERAMIC HEATER
1.
Perform the cleaning Procedures described in How to clean
your ceramic heater.
2.
Wipe all parts to dry.
3.
Pack the heater in a plastic bag and store it in a dry place.
