After using the device, please clean up the sewage bucket in time to avoid odor and keep
the ventilation path open to avoid blockage causing a decrease in suction power and
motor heating, thus affecting the service life of the floor washer.
After using the machine, please keep it in a dry place. Humidity will affect the insulation
and service life of the machine. The floor washer body and floor brush have energized
settings and cannot be soaked or rinsed in water.
Please check the condition of the nozzle regularly. If there is any blockage, please clear it
in time to avoid the decrease of suction power caused by the blockage, affecting the
performance of the machine.
Make sure to turn off the machine before replacing the rolling brush.
In case of any of the following conditions, please don't use the machine and send it to the
service store assigned by our company:
1. The cleaner has fallen from a high place, leading to obvious damage or operation
failure.
2. The power cord is damaged.
Do not disassemble the closed machine by yourself. There are no parts in this machine
that can be repaired by customers themselves. Do not try to modify the performance of
the machine, otherwise it will lead to danger.
The use of voltage that does not meet the specifications of the product will damage the
product and may cause injury to the user.
When sweeping stairs, extra care should be taken to prevent falling.
Do not shake the machine up and down or bump it violently to prevent sewage from
flowing into the motor.
When the motor is working, do not lift or carry the machine up and down, and do not put
the machine to one side or flat to prevent sewage from flowing back to the motor.
To prevent tripping and falling, the machine should be placed against the wall after using it.
Do not use the machine if the fresh water tank and sewage tank are not properly installed.
Do not place any small objects on the air outlet, do not block the air outlet, and remove
any small objects that may hinder the smooth airflow of the air outlet to prevent the
machine from overheating.
Do not get the machine body wet, otherwise there is a risk of fire due to short circuit of
the machine.
All technical and other data contained in the Use Instructions is obtained by our company
or a designated third party testing company. The final interpretation right belongs to our
company
Safety Instructions
After using the device, please clean up the sewage bucket in time to avoid odor and keep
the ventilation path open to avoid blockage causing a decrease in suction power and
motor heating, thus affecting the service life of the floor washer.
After using the machine, please keep it in a dry place. Humidity will affect the insulation
and service life of the machine. The floor washer body and floor brush have energized
settings and cannot be soaked or rinsed in water.
Please check the condition of the nozzle regularly. If there is any blockage, please clear it
in time to avoid the decrease of suction power caused by the blockage, affecting the
performance of the machine.
Make sure to turn off the machine before replacing the rolling brush.
In case of any of the following conditions, please don't use the machine and send it to the
service store assigned by our company:
1. The cleaner has fallen from a high place, leading to obvious damage or operation
failure.
2. The power cord is damaged.
Do not disassemble the closed machine by yourself. There are no parts in this machine
that can be repaired by customers themselves. Do not try to modify the performance of
the machine, otherwise it will lead to danger.
The use of voltage that does not meet the specifications of the product will damage the
product and may cause injury to the user.
When sweeping stairs, extra care should be taken to prevent falling.
Do not shake the machine up and down or bump it violently to prevent sewage from
flowing into the motor.
When the motor is working, do not lift or carry the machine up and down, and do not put
the machine to one side or flat to prevent sewage from flowing back to the motor.
To prevent tripping and falling, the machine should be placed against the wall after using it.
Do not use the machine if the fresh water tank and sewage tank are not properly installed.
Do not place any small objects on the air outlet, do not block the air outlet, and remove
any small objects that may hinder the smooth airflow of the air outlet to prevent the
machine from overheating.
Do not get the machine body wet, otherwise there is a risk of fire due to short circuit of
the machine.
All technical and other data contained in the Use Instructions is obtained by our company
or a designated third party testing company. The final interpretation right belongs to our
company
