![background image](http://html1.mh-extra.com/html/midea/mrw14s1abb/mrw14s1abb_user-manual_1791878008.webp)
8
Placement
Start to use
Energysavingtips
s
Before using the cooler,
remove all packaging
materials including
bottom cushions and
foam pads and tapes
inside the cooler, tear
off the protective film
on the door and the
cooler body.
The cooler is placed in a well-
ventilated indoor place; the
ground shall be flat, and sturdy
(rotate left or right to adjust the
feet for levelling if unstable).
Avoid direct sunlight
and heat sources such
as stove, heating radi-
ator, etc.
The top space of the cooler
shall be greater than 30cm,and
the distances from bothsides
and backside shall be more
than 10cm to facilitate
heat dissipation.
The cooler shall stay for half an hour before connecting power when it is firstly
started.
Clean up the inner chamber before put into use for first time .
Do not connect cooler to electronic energy saving plug and converter that can
convert DC into AC (E.g.: solar energy system, ship grid).
Water drop or frost will be generated on when compressor
backsideofcooler
is running, which is decided by function of cooler.
wiping outfrostor waterdropis
notneeded a
s the back will wipe them out automatically. The defrosted water will be
collected into drain tank, then inflow into water disposal pan above the compresso-
rand vaporized.
SAFETY WINE COOLER
THE COOLER PROPER USE OF
MAINTENANCE
OF THE COOLER
TROUBLE
SHOOTING
Summary of Contents for MRW14S1ABB
Page 14: ...REFROIDISSEURS VIN MRW14S1ABB...
Page 30: ......