Midea MRW14S1ABB, User Manual

Page: 10 / 30

10
de
ter
gen
t
Disconnect the cooler
Stop using the cooler
Clean the cooler
MAINTENANCE OF THE COOLER
WINE COOLER SAFETY
PROPER USE OF THE COOLER
MAINTENANCE OF THE COOLER
TROUBLE SHOOTING
Unplug power plug to disconnect the cooler.
If the cooler left unused for a long time, please:
1 Unplug the cooler;
2 Clean the cooler;
3 Keep the cooler door open.
Notice
:
Do not use detergent and solvent with sand or acid.
Dusts behind the cooler and on the ground shall be timely
eaned to improve the cooling effect and energy saving.
Check the door gasket regularly to make sure there are no debris
.
Clean the door gasket with a soft cloth dampened with soapy water
or diluted detergent.
The interior of the cooler should be cleaned regularly to avoiddor
odor.
Please turn off the power before cleaning, remove drinks ,shelves,
etc.
Use a soft cloth or sponge to clean the inside of the cooler, with
two tablespoons of baking soda and a quart of warm water. Then rinse
with water and dry with a soft cloth. After cleaning, open the door and let it dry naturally before
turning on the power.
For areas that are difficult to clean in the cooler (such as narrow sandwiches, gaps or corners), it is
recommended to wipe them regularly with a soft rag, soft brush, etc. and when necessary, combined
with some auxiliary tools (such as thin sticks) to ensure no contaminants or bacterials accumulation
in these areas.
Do not use soap, detergent, scrub powder, spray cleaner, etc., as these may cause odors in the interior
of the cooler or contaminate food.
Clean the shelves with a soft cloth dampened with soapy water or diluted detergent. Then rinse with
water and dry with a soft cloth or dry naturally.
The wooden wine rack should not be directly immersed in liquid to prevent cracking or mold after
moisture. The wooden wine rack is cleaned with a dry soft cloth. The heavily contaminated wooden
wine rack should be cleaned with a soft cloth that has been wrung out, and dry naturally.
Wipe the outer surface of the cooler with a soft cloth dampened with soap water, detergent, etc.,
and then wipe dry. Do not rub or scratch the surface of the glass door to prevent the door from
being broken or scratched.
Do not use hard brushes, clean steel balls, wire brushes, abrasives(such as toothpastes), organic
solvents (such as alcohol, acetone, banana oil, etc.), boiling water, acid or alkaline items, which
may damage the cooler surface and interior. Boiling water and organic solvents such as benzene
may deform or damage plastic parts.
Do not rinse directly with water or other liquids during cleaning to avoid short circuits or affect ele-
ctrical insulation after immersion.Water should not soak the operating control elements and lighting
system on the glass door.