On/Off
Keep
Warm
Keep Warm
Reminder
Add 1 L to 5 L of purified water to the kettle
with a water container, and the water level
should not exceed the full water mark.
Close the top cover.
Turn on the power supply, all indicators light up,
the buzzer sounds a long time. After 1 second,
all the button indicator light off, except the
“On/Off” button indicator flashes, and the kettle
enters the standby state. (If there is no
operation for 30 seconds, the kettle enters the
“Shut Down” state, press the “On/Off” button to
enter the standby state.)
Click on “Keep Warm” button to select the
required temperature, and turn on the “Purified
Water” function to boil water. The “Purified
Water” indicator and the corresponding
“Keep Warm” indicator will flash for 5 seconds.
After 5 seconds, the kettle starts to work.
The “Purified Water” indicator will be on
constantly, and the “Keep Warm” indicator will
keep on flashing. When the water is boiled to
the pre-set temperature, the “Keep Warm”
indicator will turn on constantly.
When using the “Keep Warm” function,
the water will not boil, the heating will
stop after reaching the pre-set “Keep
Warm” temperature!
Security lock
When the power is turned on, the security
lock function is activated, the “Press for
water” function is no available.
8
