How to use
Boiling - Keep Warm
Reminder
• Before the first use or after a long period of storage, add 2-3 L of water to inner liner and
boil 1-2 times to clean the inner liner. At this time, the boiled water can not be drunk!
• This product is suitable for use up to 3,000 meters above sea level.
• Be careful not to wet the kettle body when filling water.
• The “Keep Warm” setting can be carried out when boiling water or after boiling water.
The “Keep Warm” function indicator flashes, indicating that the water temperature has not
reached the pre-set “Keep Warm” temperature.
The “Keep Warm” button can select the “Keep Warm” temperature cyclically.
• Press and hold “Press for water” button before unlock the kettle, the “Unlock” indicator
flashes to prompt user to unlock.
• Preventing dry burning: If the water content in the kettle is lower than the water mark,
or no water and the electricity is continuously on, in order to prevent the machine from
dry burning malfunction. Please check the water level in the water bottle regularly.
If the water content is insufficient, please add water immediately.
• Altitude adaptive program: If water is not boiling or any other conditions, the user may
restore the factory settings and re-register the local altitude boiling point. Method:
Press the “On/Off” button and the “Boiling” button at same time to power on.
The indicator lights of “Tap Water” and “Purified Water” will be turned on at the same
time, and then turned off, which indicating the altitude self-adaptive setting is completed.
• You can’t collect water by unplugging the power cord. Under other conditions such as
Shut Down, Standby, etc., press the “Unlock”, and press the “Press for water” button to
release water.
Add 1 L to 5 L of water to the kettle with a
water container, and the water level should
not exceed the full water mark.
Unlock
Press for
water
1. In locked state, the corresponding function indicator will light off; click
on the corresponding button, the corresponding function indicator will
light on constantly, and the kettle enters the unlocked state. If there is
no operation within 10 seconds after the unlock light is on, the unlock
indicator will light off after 10 seconds and returns to the locked state.
2. In unlocked state, the corresponding function indicator will light on
constantly Click on the corresponding button to enter locked state, the
corresponding function indicator will light off.
1. In unlocked state, press and hold “Press for water” button to take
water.
2. In locked state, press and hold “Press for water” button, the
corresponding function indicator flashes for 5 seconds to prompt the
user to unlock.
Close the top cover.
6
