Keep
Warm
Turn on the power supply, all indicators light up,
the buzzer sounds a long time. After 1 second,
all the button indicator light off, except the
“On/Off” button indicator flashes, and the kettle
enters the standby state. (If there is no
operation for 30 seconds, the kettle enters the
“Shut Down” state, press the “On/Off” button to
enter the standby state.)
Click the “Boiling” button, select the “Tap Water”
function (the “Keep Warm” function is on by
default). The “On/Off” button indicator light is on
constantly. The “Tap Water” function indicator
light and the “Keep Warm” indicator will flash for
5 seconds, after 5 seconds, the “Tap Water”
function indicator will light up constantly, the
“Keep Warm” indicator will keep on flashing,
and the kettle starts to work at the same time.
After starting work, click the “Boiling” button to
switch between “Tap Water” and “Purified
Water” functions;
Click “Keep Warm” to select the “Keep Warm”
temperature, cycle through
45°C-55°C-65°C-85°C for selection; the
corresponding temperature point indicator
flashes, after boiling, the temperature drops
until the pre-set “Keep Warm” temperature,
and the indicator lights up constantly.
Press the “Unlock” button and the unlock
indicator lights up constantly.
On/Off
Press the “On/Off” button to close all
programs, the water outflow function can be
used normally.
On/Off
Boiling
Unlock
Place the water container under the water
outlet and press the “Press for water” button
to collect water, release the button to stop
water.
7
