5
Operation panel
Operation panel
•
Tap Water
(Dechlorination)
Tap Water
(Dechlorination)
Purified Water
•
Purified
Water
Boiling
Boiling
On/Off
Keep
Warm
Unlock
Press for water
Boiling
Keep
Warm
1. In standby state, click the “Boiling” button, select the “Tap Water”
function (the “Keep Warm” function is on by default). The “On/Off”
button indicator light is on constantly. The “Tap Water” function
indicator light and the “Keep Warm” indicator will flash for 5 seconds,
after 5 seconds, the “Tap Water” function indicator light will light up
constantly, the “Keep Warm” indicator will keep on flashing, and the
kettle starts to work at the same time. After starting work, click the
“Boiling” button to switch between “Tap Water” and “Purified Water”
functions;
2. After starting to boil water, single click “Keep Warm” button to select
the “Keep Warm” temperature;
3. After water is boiled and switches into “Keep Warm” mode, when the
water temperature drops to the pre-set temperature, the “Keep
Warm” indicator will be switched from flashing to constant light up.
1. In standby state, click the “Boiling” button, select the “Purified Water”
function (the “Keep Warm” function is on by default). The “On/Off”
button indicator light is on constantly. The “Purified Water” function
indicator light and the “Keep Warm” indicator will flash for 5 seconds,
after 5 seconds, the “Purified Water” function indicator will light up
constantly, the “Keep Warm” indicator will keep on flashing, and the
kettle starts to work at the same time. After starting work, click the
“Boiling” button to switch between “Purified Water” and “Tap Water”
functions;
2. After starting to boil water, single click “Keep Warm” button to select
the “Keep Warm” temperature;
3. After water is boiled and switches into “Keep Warm” mode, when the
water temperature drops to the pre-set temperature, the “Keep
Warm” indicator will be switched from flashing to constant light up.
1. In standby state, click on “Keep Warm” button to select the required
temperature, and turn on the “Purified Water” function to boil water
(Only single click on the “Keep Warm” button in standby mode is valid).
The “Purified Water” indicator and the corresponding “Keep Warm”
indicator will flash for 5 seconds. After 5 seconds, the kettle starts to
work. The “Purified Water” indicator will light up constantly, and the
“Keep Warm” indicator will keep on flashing. When the water is boiled
to the pre-set temperature, the “Keep Warm” indicator will turn on
constantly.
2. Selection range of warm keeping temperature: 45°C, 55°C, 65°C,
85°C, cycle selection.
