![background image](http://html1.mh-extra.com/html/midea/mfs90css/mfs90css_instructions-manual_1790946038.webp)
This mode’s range of continuous time and end time:
Adjustment range for continuous time:
>
0 but ≤ 10 hours
Adjustment range for end time: present time
<
end time<
=
present time + 10 hours
If meet this standard: end time = present time + continuous time
For example: the present time is 2
:
00, then the max. end time is adjusted to
12:00 (2:0
0+10:00=12:00)
. When the end time is adjusted to
12:00
, then the
continuous time is
10:00
.
5s after adjusted, automatic program is working. After 10 hours, if continuous
time is counting down to 0, turn off the relay contact, and “Relay Operation
Icon” is dark, “Auto-programming Icon” flashes, the buzzer is buzzing.
Note:
1.
only use this setting for either continuous time or end time.
For example: the present time is 2:00, and if let the oven work for 3 hours,
set the continuous time to 3:00, and the end time will automatically change
to 5:00 and vice versa.
2. If the continuous time is equal to 0 or the end time is equal to the present
time, it means that the automatic program is over.
3.
When the automatic program is over, the continuous time is 0 and the
end time is equal to the present time.
②
Automatic Mode
Use this mode for setting oven’s continuous time and end time, which means
make an appointment to boot. When the time is over, it will automatically turn
off the heating and the buzzer is buzzing to inform the user.
Press K2 twice to get into the continuous time setting mode under the common
mode, press K2 again to get into the end time setting mode.
When the continuous time setting is ok or the end time setting is ok, then press
K2 to get into the other kind of automatic program time setting,
“Auto-programming Icon” flashes, press K1 and K3 to adjust continuous time
and end time.
5s after automatic program setting, it will automatically work, and
“Auto-programming Icon” keeps lighting up. Turn off the relay contact and the
icon is dark. When work until the starting time, the relay contact is
connected, the icon is light. When the continuous time is counting down, if
the continuous time is 0, turn off the relay contact, “Relay Operation Icon” is
dark, “Auto-programming Icon” flashes and the buzzer is buzzing.
37