• Connect the yellow-green wire to the
te
rminal. This wire must be at least 10 mm
longer than the other wires.
• Connect the blue neutral wire to terminal N.
• Connect the brown power wire to terminal L.
Leave the mains cable slightly overlong so that you can pull out the appliance for
cleaning purposes.
Proceed as follows:
• Remove the rear backboard.
• Undo the screw on the terminal block that fixes the cable in place.
• Loosen the screw contacts and replace the cable with a new one of the same length.
The cable must comply with the stipulated specifi- cations.
13
