Turning on the appliance
NOTE
When you press the Start/Reset button to pause during washing,the
dishwasher will beep every minute unless you press the Start/Reset
button to start.
Starting a wash cycle...
1. Draw
out the basket (see the section entitled Loading the Dishwasher ).
2. Pour in the detergent (
Fill the
).
3. Insert the plug into the socket. The power supply is 220-240VAC 50 HZ, the
specification of the socket is 10 A 250 VAC.
ake sure that the water supply is turned on
to full pressure
"
"
see the section“
detergent”
4. Press the power button to turn on the appliance,
5. Connect the inlet hose to the tap, m
, or add water tank manually.
6. Select a suitable program according to the
Wash cycle table
,
Pause
7. When a program is selected, the response light will light. Then press the Start/
button, the dishwasher begins to start.
Premise: You can modify the washing program, If the dishwasher has been on for
a short time. Otherwise, the detergent may have already been released, and the
appliance may have already drained the wash water in this case, the
must be
cycle
r
estarted.
Change the program
NOTE
AS/NZS 2007.1
test in accordance with AS/NZS 2007.1, are as follows:
:
This program is the test cycle. The information for comparability
The power consumption of off-mode is 0.57W,
left-on mode is 0.74W
18
