About Power Connection
Please look at the rating label to know the rating voltage and connect the
dishwasher to the appropriate power supply. Use the required fuse 10 amp, time
delay fuse or circuit breaker recommended and provide separate circuit serving
only this appliance.
Ensure the voltage and frequency of the power corresponds to those on the rating
plate. Only insert the plug into an electrical socket which is earthed
properly. If the electrical socket to which the appliance must be connected is not
appropriate for the plug, rather than using adaptors or the like as they could
cause overheating and burns.
Electrical Requirements
Electrical Connection
Ensure that proper earthing exists before use
WARNING
For personal safety:
Do not use an extension cord or an adapter plug
with this appliance.
Do not, under any circumstances, cut or remove
the earthing onnection from the power cord.
c
Connect the cold water supply hose to a threaded 3/4
connector and make sure that it is fastened tightly in place.
If the water pipes are new or have not been used for an
extended period of time, let the water run to make sure that
the water is clear and free of impurities. If this precaution is
not taken, there is a risk that the water inlet can get blocked and damage
the appliance.
Please Note: If the supplied hose does not fit your tap, please contact your local
plumbing supply center where adapters are available for purchase.
Water Connection
26
