7. Shut down
6 .
. Operation Instructions
Applicable Pots
Applicable Pots
. Methods for Cleanness and Maintenance
Troubleshooting Guide
1. Please unplug the hotplate before cleaning, after the ceramic plate isn’t hot, you can
start cleaning.
2. The dust around the air entry and air vent be cleaned lightly with flexible dry
cloth or a flexible brush or cleaner.
3. The slight dirt on the ceramic panel: please clean with soft wet cloth.
4. The oily dirt: clean with soft wet cloth dipped in little toothpaste or neutral
detergent and clean with soft wet cloth until no residue exists.
1. Power cord replacement
If the power cord is damaged, please contact the relevant after-sale service agent,
who will dispatch personnel for the repair. For the purpose of your safety, please
2. Trouble shooting
Note:
1. Please use the pots sold along with the hotplate. It is better not to use other
alternatives especially pressure vessel) so as to avoid any unfavorable influence on
the operational performance. If using other pots, please observe the following
conditions:
Requirement for pot materials: containing magnetic inducting materials
Shape requirement: plat bottom, with the diameter more than 12 cm and less
than 26 cm.
2. After the first use, some white spots would appear at the bottom of the pot. This is
normal. Please pour some vinegar into the pot, heat it at about 60-80
O
C, then wipe
the spots away with brush.
3. Inapplicable pots material: glass, ceramic, aluminium, copper and other non
magnetic material.
4 If the pot is moved away, the induction hotplate will stop heating immediately.
After the buzzer sounds about 1minute, it will go into standby mode automatically.
Default timer hours
Level
1
2
3
4
2
2
2
2
2
5
2
6
Timer
In working state, after the "Timer" key is pressed, the buzzer gives out a
sound, the nixie tube flashes and displays the “0”, indicating that the induction
hotplate enters timing working state. Each time the "+" or "-" is pressed, the time can
increase or decrease by 1 minute. If it is held, the time will increase or decrease
minutes quickly with 10 minutes as an increment.
In the timing setting state, press the timer button again will cancel the timing. After
timing period is set, the time stabilizes after the nixie tube flashes for 5 seconds
to confirm the period to be effective. If the timer is 0, the timer is noneffective.
In the timing working state, hold the timer button to cancel the timing.
When the working time reaches, the hotplate will shut down automatically.
Automatic Shutdown Protection:
The induction hotplate will shut down when the hotplate default timer of program is
reached unless the user sets the timer himself.
The default timer of each level are as follow:
After using, please press the “
ON/STANDBY
” button, the induction hotplate will stop
heating.
The fan will run for a while to cool the induction hotplate down.
Iron plate
Enamel cooking
utensil
Iron kettle
Enamel stainless
steel kettle
Iron pan
Stainless steel pot
Iron oil frying pan
6
5
never replace it by yourself.
