3
E. Securing the Cord to the Base
• With the fan still on its side, locate the cord holding bracket on the bottom of the
base.
• Gently pull any slack out of the power cord, and carefully work the cord into the
bracket slots and out through the exit hole in the base. Fig. 7. Be careful not to break
either of the bracket slots.
• Return the tower fan to its upright position.
Note: Do not operate the tower fan unless it is in its proper, upright position.
OPERATION INSTRUCTION
Fig. 5
Fig. 7
Fig. 6
Fig. 3
Positioning
Hole
Positioning
Pole
Fig. 1
Pedestal Assembly
Fig. 2
Fig. 4
Base Assembly
I. CONTROL PANEL
1. -ON/OFF KEY
The key is for switching on the fan. The fan will start
at low speed. The numeral 1 will appear in the screen
display.
Press this key again to turn fan off.
2. -TIMER KEY
Choose from 1 to 8 hours. Press Timer key once for 1-hour timer and
press or to increase or decrease the timer.
3. -OSCILLATION KEY
Press this key to oscillate the fan. To fix the fan direction, press this key again to
stop the oscillation when the fan body is pointing in the desired direction. DO
NOT attempt to rotate the fan body by hand! Doing so will damage the
oscillation mechanism.
4. ADJUSTING FAN SPEED
- increases the fan speed. When the fan is on, press this button to increase
the fan speed. The display screen will show the increase in speed from 1 (Low)
to 2 (Medium) to 3 (High).
