2
PART FIGURE
Note: All the pictures in this manual are for explanation purpose only. Any discrepancy between
the real object and the illustration in the drawing shall be subject to the real subject.
1. Body
2. Pedestal
3. Base
4. Wing Screws
5. Power cord
A. Pedestal Assembly
• Line up the front and rear pedestal assembly pieces and firmly snap together.
Fig. 1. The rear piece has a screw hole opening near the top.
B. Base Assembly
• Connect the two pieces of the base together by inserting the four pins of the rear
half B into the four channeled holes for them in the front half A . Fig. 2.
C. Securing the Pedestal to the Base
• Align the 3 screw holes on the bottom of the pedestal with the 3 holes on the base
and insert pedestal into base. Fig. 3.
• Secure the base assembly to the pedestal by inserting and tightening the 3 wing
screws into the 3 holes located on the bottom of the base (Fig. 4).
D. Securing the Tower Fan to the Pedestal
• Carefully turn the fan on its side and place on a table. Feed power cord through the
center of the pedestal and base assembly.
• Insert the pedestal over the base of the fan body so that the tabs in the fan body
base fit into the slots for them in the pedestal. Rotate the pedestal slightly to secure
the tabs into the slots. When correctly secured the screw hole in the fan body base
will be aligned with the screw hole in the pedestal. Fig. 5.
• Secure the pedestal to the fan body base by inserting and tightening a wing screw
into the attachment hole. Fig. 6
ASSEMBLY INSTRUCTIONS
