Midea EGV4.45, User Manual, Page: 97 / 104

40
Rust stains on
cutlery
The items
concerned are
not corrosion-
resistant.
Avoid washing items that are not
corrosion- resistant in a
dishwasher.
A program was
not executed
after salt was
added to the
dishwasher.
Traces of salt
have entered
the wash cycle.
Run a wash program without
dishes each time you add salt.
After adding salt, do not select
the Turbo function (if available).
The softener
cap is loose. Check that the cap of the softener
is securely fastened.
Knocking noises in
the water pipes May be caused
by the on-site
installation or
the cross-
section.
of the pipeline. Does not affect the
functioning of the dishwasher.
In case of doubt, contact a
qualified installer.
The dishes are not
clean The dishes were
loaded
improperly.
See "Preparing and loading dishes".
The program
was not strong
enough.
Select a more intensive program.
White spots on
dishes and glasses
Hard water can
cause lime
deposits.
Add more detergent.
Black or grey stains
on the dishes
Aluminum
utensils rubbed
against the
dishes.
Use a mild abrasive cleaning agent
to remove these spots.
Detergent left in the
dosing unit
Dishes are
blocking the
dosing unit.
Rearrange the dishes.