Midea EGV4.45, User Manual, Page: 89 / 104

32
Connecting the drain hoses
Insert the drain hose into a drainpipe with a minimum diameter of 4 cm
or let it run into the sink, taking care not to kink or crush it. The height of
the drain hose must be less than 1,000 mm. To avoid backflow in the
hose, the free end of the hose must not be immersed in water.
Fix the drain hose securely in position A or B.
Draining excess water from hoses
If the sink is 1,000 mm higher than the floor, the excess water in the
hoses cannot be drained directly into the sink. In this case, excess
water from the hoses must be drained into a bowl or suitable vessel
located outside and lower than the sink.
Water supply
Connect the water drain hose. The drain hose must be correctly installed to
prevent water leaks. Ensure that the water hose is not kinked or crushed.
worktop
back of dishwasher
A
B
water supply Ø 40 mm
drain pipe
main cable
drain hose
max.
1,000
m
m