Midea EGV4.45, User Manual, Page: 75 / 104

18
Filling the rinse aid container
1
Lift the handle to remove the lid of the
rinse aid container.
2
Pour the rinse aid into the dispenser,
taking care not to overfill it.
Adjusting the rinse aid container
To achieve a better drying result with limited rinse aid, the dishwasher is
designed to allow the user to adjust the consumption of rinse aid. Follow
these steps:
1. Open the door and switch on the appliance.
2. Within 60 seconds of pressing the power button, press the program
button for more than 5 seconds and then press the timer button to
enter the set model. The rinse aid indicator will flash at a frequency of
1 Hz.
3. Press the program button to select the correct water softener
according to your usage habits. The settings change in the
following order: D1->D2->D3->D4->D5->D1.
The higher the number, the more rinse aid your dishwasher will use.
4. Wait 5 seconds or press the power button to complete the setting and exit
the setting mode.
3
Afterwards, close the cap.