Midea EGV4.45, User Manual, Page: 88 / 104

31
WARNING
A hose attached to a sink sprayer may burst if it is installed on the same water
pipe as the dishwasher. If your sink has such a sprayer, it is advisable to
disconnect the hose and close the hole.
Connecting the safety supply hose
1. Pull the safety supply tubes completely out of the compartment at the
back of the dishwasher.
2. Tighten the screws of the safety supply hose on the water tap with a 3/4-
inch thread.
3. Switch the water on completely before starting the dishwasher.
Detaching the safety supply hose
1. Shut off the water.
2. Unscrew the safety supply hose from the water tap,
please add the direct for lift or sink.