background image

•     Hands shall not be inserted into running spin-dry tub .
•     If the spin-dry tub does not stop within 15 seconds after 
       opening the cover , please stop using the machine and
       have it repaired. 
•     The new hose-sets supplied with the appliance are to be 
       used and that old hose-sets should not be reused.
•     Before any maintenance the device, unplug the appliance
       from the mains.
•     Always unplug the machine and turn off the water supply 
       after 

use. 

The max. inlet water pressure, in pascals. The 

       min. inlet water pressure, in pascals.
•     To ensure your safety, power plug must be inserted into 
       an earthed three-pole socket. Check carefully and make sure 
       that your socket is properly and reliably earthed.
•     Make sure that the water and electrical devices must be
       connected by a qualified technician in accordance with the
       manufacturer's instructions  and local safety regulations.

 

Risk

 

to

 

children

!

       from 8 years and above and persons with reduced physical, 
       sensory or mental capabilities or lack of experience and 
       knowledge if they have been given supervision or 
       instruction concerning use of the appliance in a safe way 
       and understand the hazards involved. Children shall not 
       play with the appliance. Cleaning and user maintenance 
       shall not be made by children without supervision.

IEC countries: This appliance is not intended for use by 

       persons(including children) with reduced 

•     

•     

physical, 

       sensory or mental capabilities or lack of experience and 
       knowledge unless they have been given supervision or 
       instruction concerning use of the appliance by a person 
       responsible for their safety.

EN countries: the appliance can be used by children aged 

3

SAFETY INSTRUCTIONS

Summary of Contents for DMWM80






















Reviews: