background image

•     It isn't intended to be built-in using.
•     The openings must not be obstructed by a carpet.
•     Washing machine shall not be installed in bath room or 
       very wet rooms as well as in the rooms with explosive 
       or caustic gases.
•     Remove all packages and transport bolts before using 
       the appliance. Otherwise, serious damage may result.
•     The washing machine with single inlet valve only can be  
       connected to the cold water supply. The product with 
       double inlet valves should be correctly connected to the 
       hot water and cold water supply.
•     Plug must be accessible after installation.

Risk

 

of

 

damaging

 

appliance!

•     Your product is only for home use and is only designed 
       for the textiles suitable for machine washing.
•     Do not climb up and sit on top cover of the machine.
•     Do not lean against machine door.
•     Cautions during Handling Machine:
       

   

1.Transport bolts shall be reinstalled to the machine by 

          a specialized person.
       2.The accumulated water shall be drained out of the 
          machine.
       3.Handle the machine carefully. Never hold each protruded 
          part on the machine while lifting. Machine door can 
          not be used as the handle during the conveyance.
       4.This appliance is heavy. Transport with care.  
•     Please do not close the door with excessive forces.
•     It is forbidden to wash carpets.

5

SAFETY INSTRUCTIONS

Summary of Contents for DMWM80






















Reviews: