![background image](http://html1.mh-extra.com/html/midea/csd80gn1/csd80gn1_technical-manual_1791186026.webp)
your neighbor’s window.
6) A place where the drain water may make problems.
7) A place that the noise interferes your neighbors everyday life.
8) A place that is exposed to a strong wind.
9) A place that is too weak to bear the weight of the unit.
10) A place that block a passage.
11) Uneven place.
12) Insufficient ventilation place.
13) Near a private power station or high frequency equipment.
Caution:
When an outdoor unit is installed in a place that is always exposed to a strong wind like a
coast or on a high storey of a building, secure a normal fan operation by using a duct or a wind
shield.
When the outdoor unit is installed in an elevated position be sure to secure its feet.
Keep indoor unit, outdoor unit, power supply wiring and transmission wiring at least 1 meter
away from televisions and radios. This is to prevent image interference and noise in those
electrical appliances. (Noise may be generated depending on the conditions under which the
electric wave is generated, even if 1 meter is kept.)
The insulation of the metal parts of the building and the heater pump should comply with the
regulation of National Electric Standard.
Summary of Contents for CSD80GN1
