EN-7
FITTING THE OVEN INTO THE KITCHEN UNIT
Fit the oven into the space provided in the kitchen unit;
it may be fitted underneath a work top or into an
upright cupboard. Fix the oven in position by screwing
into place, using the two fixing holes in the frame. To
locate the fixing holes, open the oven door and look
inside. To allow adequate ventilation, the measurements
and distances adhered to when fixing the oven.
IMPORTANT
If the oven is to work properly, the kitchen housing must
be suitable. The panels of the kitchen unit that are next
to the oven must be made of a heat resistant material.
Ensure that the glues of units that are made of veneered
wood can withstand temperatures of at least 120
O
C.
Plastics or glues that cannot withstand such
temperatures will melt and deform the unit, once the
oven has been lodged inside the units, electrical parts
must be completely insulated. This is a legal safety
requirement. All guards must be firmly fixed into place
so that it is impossible to remove them without using
special tools. Remove the back of the kitchen unit to
ensure an adequate current of air circulates around the
oven. The hob must have a rear gap of at least 45 mm.