Midea 9ASI-A-1209, Service Manual

Page: 4 / 57

4
condenser and evaporator.
„
For installation, always contact the dealer or an authorized service center.
„
Do not install the product on a defective installation stand.
„
Be sure the installation area does not deteriorate with age.
If the base collapses, the air conditioner could fall with it, causing property damage, product failure,
and personal injury.
„
Do not let the air conditioner run for a long time when the humidity is very high and a
door or a window is left open.
„
Take care to ensure that power cable could not be pulled out or damaged during
operation.
There is risk of fire or electric shock.
„
Do not place anything on the power cable.
There is risk of fire or electric shock.
„
Do not plug or unplug the power supply plug during operation.
There is risk of fire or electric shock.
„
Do not touch (operation) the product with wet hands.
„
Do not place a heater or other appliance near the power cable.
There is risk of fire and electric shock.
„
Do not allow water to run into electrical parts.
It may cause fire, failure of the product, or electric shock.
„
Do not store or use flammable gas or combustible near the product.
There is risk of fire or failure of product.
„
Do not use the product in a tightly closed space for a long time.
Oxygen deficiency could occur.
„
When flammable gas leaks, turn off the gas and open a window for ventilation before
turn the product on.
„
If strange sounds or smoke comes from product, turn the breaker off or disconnect the
power supply cable.
There is risk of electric shock or fire.
„
Stop operation and close the window in storm or hurricane. If possible, remove the
product from the window before the hurricane arrives.