17
5.4. Reassembly
5.4.1. Reassemble of the Ignition Pin
Step 1. Pull the line of the ignition pin in to the hole on bottom cup along the gap on bottom cup
Step 2. Push ignition pin to adjust the position
Step 3.
Klemm ignition pin with snap spring to fox the ignition pin
.
5.4.2. Reassemble of the Thermocouple
Step 1. Insert thermocouple into the the relevant hole of the bottom cup from bottom to top.
Step 2. Adjust position of the thermocouple in the hole of the bottom cup.
Step 3. screw up the nut to fix the thermocouple.
5.4.3. Reassemble of the Gas Pipe
Step 1.Insert the head of the gas pipe into installation parts of the bottom cup or the valve
Step 2.Screw up the nut of the joint with spanner
5.4.4. Check Point after assembly
a. At completion of the appliance repair, assemble after removing tools inside of the appliance.
b.
You must conduct a leakage test after repairing.(refer to the leakage test on
5.3
)
c. If ignition does not work, repeat ignition several times so that you
can remove remaining air in the gas connection
d. Check combustion status by conducting aging
Summary of Contents for 60G SERIES
Page 5: ...5 2 Description of the appliance 2 1 Features Glass Q502 GXX Stainless Q411 SXX...
Page 6: ...6 2 2 Components and parts 1 Burner 2 Pan support 3 Knob 4 Drip tray...
Page 10: ...10 4 Electric Diagram a Four burners model b Five burners model...
Page 18: ...18 6 Troubleshooting 6 1 Troubleshooting...