13
5.3.2. Disassemble the Thermocouple
Step 1: Unscrew the nut out.
Step 2: Pull the silver terminal of Thermocouple
Step 3: When reassembling, replace parts correctly
5.3.3. Disassemble of the Ignition Pin
Step 1: Pull the washer and take off ignition pin
Step 2: Pull the housing of Ignition pin out of the igniter.
Step 3: When reassembling, replace parts correctly.
5.3.4. Disassemble of the Microswitch Harness
Step 1: Before you disassemble the harness, take off the plastic e – ring.
Step 2: When you take off the micro switch harness , please be careful not to break the hook.
Step 3: When you reassemble the harness, replace it correctly.
Step 4: Detach the wire from the power cord assembly harness.
Step 5: Hold housing of the wire by hand and pull it out of the igniter
.
Summary of Contents for 60G SERIES
Page 5: ...5 2 Description of the appliance 2 1 Features Glass Q502 GXX Stainless Q411 SXX...
Page 6: ...6 2 2 Components and parts 1 Burner 2 Pan support 3 Knob 4 Drip tray...
Page 10: ...10 4 Electric Diagram a Four burners model b Five burners model...
Page 18: ...18 6 Troubleshooting 6 1 Troubleshooting...