2. Place the kettle on power base making sure it is affixed securely.
3. Plug the power base cord into a 220-240V~ AG wall outlet. The unit
will emit an audible signal; the display screen will flash 'C' twice and
display the current water temperature in Celsius.
4.
Automatic shutdown:
In the standby state, the device will shut down
all displays if there is no operation within three minutes.
5.
Heat preservation time:
The time limit of heat preservation is two
hours;
6.
Temperature selection:
1.The range of heating temperature selection is 40-100°C.
2.The range of heat preservation temperature is 40-90°C.
7.
Heating:
1.While switching on, if water temperature is greater than set tempera-
ture, the device will stop heating and automatically enter the heat
preservation state.
2.If water temperature rises to set temperature, the device will stop
heating and automatically enter the heat preservation state.
6
Operating Instructions
1. Push the button on the handle to open the lid and
fill the kettle with a minimum of 0.5 litres of water.
Note:
DO NOT attempt to fill while the kettle is on the power
base.
DO NOT use for any purpose other than boiling water.
Other liquids will contaminate the interior of the kettle.
DO NOT fill past the MAX level indicated on the water
level window of the kettle. Overfilling may cause water to
spill out when boiling.
To avoid the risk of splashing while pouring hot water, make sure the lid is
securely closed onto the kettle before operation.
CAUTION: