3.In the heat preservation state, it displays set temperature (if water
temperature is lower than or equal to set temperature - 5°C, it displays
real-time water temperature);
4.No temperature display in the power-off state.
13.
Working status indication:
1.The light will be always on when the #1 button is pressed, and will be
out after set temperature displays;
2.The light will be always on when water is heated to set temperature and
enter the heat preservation mode;
3.The light will be always on when water is heated to the boiling mode;
4.The light will flicker in the standby state and will be always on in the
working state.
14.
Function prompts:
1.When the power is on, there will be a long sound;
2.With a click on buttons, there will be a short sound;
3.When heating and heat preservation finish, there will be two long sounds.
Operating Instructions
8
Note:
With a click on the shutdown button, there will be a long sound.
In the non-temperature setting state, clicking the button will make no
sound.
15.
Kettle lift memory:
If the kettle body leaves the base but is put back on the base within 30
seconds, the electric kettle status will be in line with that before it is lifted;
otherwise, it will be in the standby state.
16.
Dry burning protection:
After dry burning, the dry burning piece of the temperature controller will
pop up and conduct automatic protection.
17.
Time-limited protection:
If the boiling time s greater than or equal to about 15 minutes, the operation
will be comprehensively finished;
If temperature does not rise in more than three minutes during water boiling,
the device will enter the shutdown state.
