Middleby Marshall CTX DZ26T Domestic Owner'S Operating & Installation Manual Download Page 3

 

iii 

Model No. _________________________ Serial No. _________________________ Installation Date____________________ 

 

MIDDLEBY MARSHALL 

NO QUIBBLE LIMITED WARRANTY 

(U.S.A. ONLY) 

MIDDLEBY MARSHALL HEREINAFTER REFERRED TO AS “THE 

SELLER”, WARRANTS EQUIPMENT MANUFACTURED BY IT TO 

BE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP 

FOR WHICH IT IS RESPONSIBLE. THE SELLER’S OBLIGATION 

UNDER THIS WARRANTY SHALL BE LIMITED TO REPLACING 

OR REPAIRING AT SELLER’S OPTION, WITHOUT CHARGE, 

ANY PART FOUND TO BE DEFECTIVE AND ANY LABOR AND 

MATERIAL EXPENSE INCURRED BY SELLER IN REPAIRING OR 

REPLACING SUCH PART. SUCH WARRANTY SHALL BE 

LIMITED TO THE ORIGINAL PURCHASER ONLY AND SHALL BE 

EFFECTIVE FOR A PERIOD OF ONE YEAR FROM DATE OF 

ORIGINAL INSTALLATION OR 18 MONTHS FROM DATE OF 

PURCHASE, WHICHEVER IS EARLIER, PROVIDED THAT 

TERMS OF PAYMENT HAVE BEEN FULLY MET. 

This warranty is valid only if the equipment is installed, started, and 

demonstrated under the supervision of a factory-authorized installer. 

Abuse, acts of God, belt jams, cleaning, customer abuse, insufficient 

utilities, lubrication, maintenance, non-oven related issues, 

preventative maintenance, or normal maintenance function 

including adjustment of airflow, burners, conveyor components, 

door mechanisms, microswitches, pilot burners, thermostats, and 

replacement of bushings, light bulbs, fuses, indicating lights,  and 

wear points, are not covered by this 

no quibble warranty

Seller shall be responsible only for repairs or replacements of 

defective parts performed by Seller’s authorized service personnel. 

Authorized service agencies are located in principal cities 

throughout the contiguous United States, Alaska, and Hawaii. This 

warranty is valid in the 50 United States and is void elsewhere 

unless the product is purchased through Middleby International with 

warranty included. 

The foregoing warranty is exclusive and in lieu of all other 

warranties, expressed or implied. There are no implied 

warranties of merchantability or of fitness for a particular 

purpose. 

The foregoing shall be the Seller’s sole and exclusive obligation and 

Buyer’s sole and exclusive remedy for any action, including breach 

of contract or negligence. In no event shall Seller be liable for a sum 

in excess of the purchase price of the item. Seller shall not be liable 

for any prospective or lost profits of the buyer. 

This warranty is effective on Middleby Marshall equipment sold 

on, or after January 1st, 2007. 

© 2019 - Middleby Marshall, A Middleby Company. 

MIDDLEBY MARSHALL 

OVEN LIMITED WARRANTY 

(Non U.S.A.) 

The Seller warrants equipment manufactured by it to be free from 

defects in material and workmanship for which it is responsible. The 

Seller’s obligation under this warranty shall be limited to replacing 

or repairing, at Seller’s option, without charge, F.O.B. Seller’s 

factory, any part found defective and any labor and material 

expense incurred by Seller in repairing or replacing such part. Such 

warranty is limited to a period of one year from the date of original 

installation or 15 months from date of shipment from Seller’s factory, 

whichever is earlier, provided that terms of payment have been fully 

met. All labor shall be performed during regular working hours. 

Overtime premium will be charged to the Buyer. 

This warranty is not valid unless equipment is installed, 

started, and demonstrated under the supervision of a factory-

authorized installer. 

Normal maintenance functions including lubrication, adjustment of 

airflow, thermostats, door mechanisms, microswitches, burners and 

pilot burners, and replacement of light bulbs, fuses, and indicating 

lights, are not covered by warranty. 

Any repair or replacement of defective parts shall be performed by 

Seller’s authorized service personnel. Seller shall not be responsible 

for any costs incurred if the work is performed by anyone other than 

the Seller’s authorized service personnel. 

When returning any part under warranty, the part must be intact and 

complete, without evidence of misuse or abuse, freight prepaid. 

Seller shall not be liable for any consequential damages of any kind 

which occur during the course of installation of equipment, or which 

result from the use or misuse by Buyer, its employees or others of 

the equipment supplied hereunder, at Buyer’s sole and exclusive 

remedy against Seller for any breach of the foregoing warranty or 

otherwise shall be for the repair or replacement of the equipment or 

parts thereof affected by such breach. 

The foregoing warranty shall be valid and binding upon Seller if and 

only if Buyer loads, operates, and maintains the equipment supplied 

hereunder in accordance with the instruction manual provided to 

Buyer. Seller does not guarantee the process of manufacture by 

Buyer or quality of product to be produced by the equipment 

supplied hereunder and Seller shall not be liable for any prospective 

or lost profits of Buyer. 

The foregoing shall be Seller’s sole and exclusive obligation and 

Buyer’s sole and exclusive remedy for any action, whether in breach 

of contract or negligence. In no event shall Seller be liable for a sum 

in excess of the purchase price of the item. 

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF 

ALL  OTHER  EXPRESS AND IMPLIED WARRANTIES 

WHATSOEVER.  SPECIFICALLY THERE ARE NO IMPLIED 

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A 

PARTICULAR PURPOSE. 

 

Middleby Cooking Systems Group 

 

1400 Toastmaster Drive 

 

Elgin, IL 60120 

 

(847) 741-3300 

 

FAX (847) 429-7508 

 

Summary of Contents for CTX DZ26T Domestic































































Reviews: