Middleby Marshall CTX DZ26T Domestic, Owner'S Operating & Installation Manual

Page: 10 / 62

SECTION 2
INSTALLATION
10
I. UNLOADING, DIMENSIONS, AND
ROUGH-IN
Your Middleby Marshall DZ33T/DZ26T-Series Oven is
shipped partially assembled. It will arrive in a carton on
a crate.
A. Inspect for Shipping Damage
All shipping containers should be examined for
damage before and during unloading. This equipment
was carefully inspected and packaged at the factory.
The freight carrier has assumed responsibility for its
safe transit and delivery. If equipment is received in
damaged condition, either apparent or concealed, a
claim must be made with the delivering carrier.
• Apparent Damage or Loss: If damage or loss is
apparent, it must be noted on the freight bill or
express receipt at the time of delivery, and it must
be signed by the carrier’s agent (driver). If this is
not done, the carrier may refuse the claim. The
carrier will supply the necessary claim forms.
•
Concealed Damage or Loss: If damage or loss is
not apparent until after equipment is uncrated, a
request for inspection of concealed damage must
be made with carrier within 10 days. The carrier
will make an inspection and will supply necessary
claim forms. Be certain to retain all contents plus
external and internal packaging/crating materials
for inspection.
B. Placement of Oven
Some very important considerations must be made
when choosing the place where the oven is to operate.
See Figure 7 to Figure 12 for dimensions.
• This oven is conveyorized and operates
continuously. It should be placed so it fits into the
“flow” of the operation.
•
Drafts entering the oven chambers can cause
inconsistent cooking results. Check the area
surrounding the oven and eliminate sources of
drafts such as open windows or doors and fans or
other appliances that cause air circulation.
• Oven should be positioned so hot air from another
piece of equipment cannot enter the oven cooling
fan air intake on the oven front. Serious problems
could occur.
NOTICE
To validate a new oven(s) warranty a certified CTX
installer must supervise the installation.
C. Items for Stacking Oven
The following items are required for stacking ovens:
Quantity Description
2 10' (305cm) 4-by-4 boards
2 4' (122cm) 4-by-4 boards (stacking ovens only)
2 1-1/2"x7' (213cm) rigid pipe Schedule 40
2 Custom M5 Lift (Vermette)