IMPORTANT SAFETY INSTRUCTIONS
WARNING:
A WARNING alerts you to a situation that could
result in serious personal injury or death.
!
IMPORTANT WARNINGS AND CAUTIONS!
WARNING!
Failure to read, understand and follow the
following information can result in serious personal injury,
damage to the equipment or voiding of the warranty. It is
the responsibility of the Installer/User to ensure
that this product is loaded according to specifications.
!
WARNING! TIPPING HAZARD
Verify stability legs/wheels are engaged before fully
extending slides. Legs/wheels will automatically drop as
slides are pulled forward. Without legs/wheels in place,
a serious unstable condition can occur which may cause
possible serious injury or damage to the equipment.
!
Page 2
CAUTION:
A CAUTION alerts you to a situation that may
result in minor personal injury or damage to the product
and /or property.
CAUTION!
Secure trim plate in place before moving
credenza cabinet. Damage could occur to the
C5D-SRSR12, credenza, installed components and
possible injury to the user.
!
TOOLS REQUIRED
#2 Phillips Head Screwdriver
1/2” Wrench
7/16” Wrench
HARDWARE KIT INCLUDES
IMPORTANT NOTES
SIDE VIEW
(SIDE REMOVED FOR CLARITY)
FRONT
RACKRAIL
LACER
BAR
1/8” Hex Key
1/4” - 20 Flange Nuts
#10 - 32 x 1/2” Hex Head Screws
5/16” - 18 Flange Nuts
1/4” - 20 x 3/4” Machine Screws
#10 - 32 Rack Screws
QTY DESCRIPTION
1
8
4
14
8
26
1) Access to the underside of credenza is required for mounting SRSR base to credenza.
2) It is preferred to install C5-D SRSR bay prior to installing C5 wood side panels and doors.
If wood is installed, bay door must be removed prior C5-D SRSR installation.
(Refer to Page 6 Figure I for door removal instructions)
3) Prior to installing the SRSR into the C5 -D you must remove the two front rackrails (using a
7/16” wrench). Remove the Phillips head screw affixing the lacer bar to the rackrail. Once
the rail is removed, reattach the lacer bar. (See Below)
!
