Page 6
ROTATING
TAB
LOCKOUT
LEVER
To rotate the sliding carriage, pull rotating tab as shown below
(FIGURE H)
. The sliding carriage
conveniently locks in the 60º and 90º positions for servicing. The the 0º position locks for closure.
NOTE
: When opening and extending the rack bay,
the credenza door for that bay must be removed
to accommodate the rotation of the sliding
carriage. Refer to the steps below or the
C5-D Deep Credenza Rack assembly
instructions I-00565 for door removal information.
ROTATE
FIGURE H
SRSR ROTATING SLIDING RAIL SYSTEM
C5-D DOOR REMOVAL AND INSTALLATION
1) Remove hinge screw from each hinge to
remove door as shown.
(FIGURE I)
HINGE SCREWS (2)
(FIGURE I)
