SETUP OF UPS-IPCARD CONTINUED
Page 14
Method 2: Using a Command Prompt
1) Obtain the MAC address from the label on the UPS Network Interface Card rear panel. Each UPS
Network Interface Card has a unique MAC address.
2) Use the ARP command to set the IP address. Example: To assign the IP Address 192.168.20.240 for
the UPS Network Interface Card, which has a MAC address of 00-0C-15-00-00-01 you will type in the
following command prompt from a PC connected to the same network as the UPS Network Interface
Card. (1) Type in “arp-s 192.168.20.240 00-0C-15-00-00-01” then press ‘Enter’.
3) Use the Ping command to assign a size of 123 bytes to the IP. (1) Type in “ping 192.168.20.240 -1 123”
then press ‘Enter’.
Method 3: Login from a Web Interface
1) Type the IP address of the UPS in your web browser and hit ‘Enter’ to access the UPS.
There are two user account types.
- Administrator (default username : admin ; default password : admin)
- Viewer (default username : guest ; default password : guest)
The administrator can access all functionality including enable/disable the guest account. The guest
account can access “read only” functionality but can not control or change any settings
2) The IP address can be changed by accessing the system>tcp/ip menu. Refer to the MAP UPS-IPCARD
User’s Manual for more detail (I-00453).