Z
F
H
Pole
Channels
FIGURE D
MOUNTING THE ARM ASSEMBLY TO THE POLE BASE
1. Insert arm assembly (Z) into pole base (F).
2. Tighten set screws in the pole base (F) against the arm assembly (Z).
NOTE:
If set screws (shipped in the pole base) do not contact the outer diameter of the pole when tightened but are instead
lined up to reach into the pole channels, replace the set screws with the longer set screws (H). (See Figure D)
(MM3-C-330 ONLY) INSTALLING THE CENTER MOUNT
1. Slide center mount (AA) into column grooves at desired mounting height. Tighten two screws (one on top and one
on bottom of center mount) to secure center mount (AA) to column. (See Figure E)
2. Install pole cap (AB) to top of column. (See Figure E)
AB
AA
Tighten screws
on center mount (AA)
Page 8
FIGURE E
