CABLE MANAGEMENT
1. Press insides of cable management covers at both ends to unhinge tabs on either end of cable management
cover on upper arm. (See Figure R)
2. Lift cable management cover up until tabs are unhinged and cover is in the “open” position. (See Figure R)
3. Route cables through cable management channels. (See Figure S)
IMPORTANT ! :
Be sure to leave enough slack in the cables near display and arm joint to allow for full arm
articulation!
4. Close cable management covers on monitor arm. (See Figure S)
5. Repeat Steps 1-4 for lower arm.
6.
(OPTIONAL)
Route through cable clip on column. (See Figure T)
Cable management cover tabs
1
2
FIGURE R
FIGURE S
2
2
4
4
3
3
Cable (typical)
FIGURE T
6
Cable clip
Page 14
