Midas DL451, Operator'S Manual

Page: 64 / 76

48
Chapter 6: Main Menu
DL451 Modular I/O
Operator Manual
To set up the word size for the digital outputs
1
Enter the main menu and go to option 5,
as shown in diagram left; see “To enter the
main menu and select an option” on page 42.
2
Press MENU to go to the “Select Board”
options (default is “A”).
3
Use the down arrow button to go the board
you require, for example, “C”.
4
Press SELECT to go to the “Dig. IO
settings” options (default is “Clock Setup(out)”)
and use the down arrow button to go the “Word
Size (out)” option.
5
Press SELECT to go to the “Select
Channels” options (default is “Channels 1-2”).
6
Use the down arrow button to go the pair
of channels you require, for example, “Channels
7-8”.
7
Press SELECT to go to the “select bit size”
options (default is “16 bits”).
8
Use the down arrow button to go the word
bit size you require, for example, “20 bits”.
9
Press SELECT to select this option and
save the setting. The display will show the
“Saving new setting” message and then go back
to the “select bit size/16 bits” display.
10
Use the MENU button to exit.
2
x2
3
6
x3
5
7
8
9
4